1 / 2
Check appliance compatibility
How to find your E-Number
The model number (E-number) is located on the type plate of your device.
Technical Overview
Product group for which the accessory is available
Hob
Special Features
Vertical 90° bend with smaller radius for ducting (partly) within the furniture (for a 65cm worktop depth)
90° flat duct bend element (male) in vertical configuration with small radius
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
Specifications
Vertical 90° bend with smaller radius for ducting (partly) within the furniture (for a 65cm worktop depth)
90° flat duct bend element (male) in vertical configuration with small radius
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).